Calcium Hydroxide for Epoxy Propane Raw Material
    Publish time 2020-09-28 10:55    
Calcium Hydroxide for Epoxy Propane Raw Material
Calcium hydroxide (traditionally called slaked lime) is an inorganic compound with the chemical formula Ca(OH)2. It is a colorless crystal or white powder and is obtained when calcium oxide (called lime or quicklime) is mixed, or slaked with water. It has many names including hydrated lime, caustic lime, builders' lime, slack lime, cal, or pickling lime. Calcium hydroxide is used in many applications, including food preparation, where it has been identified as E number E526. Limewater is the common name for a saturated solution of calcium hydroxide.

Specification GB 25572-2010 FCC V
Ca(OH)2 95.0~100.5 95.0~100.5
carbonate Passes test Passes test
Magnesium, basic salt 2.0 4.8
acid non-soluble substance 0.1 0.5
Arsenic 2 3
fluoride 50 50
Pb 2 2
Heavy metals(as Pb) 10 ---
Loss on drying 1.0 ---
Sieve residue(0.045mm) 0.4 ---


One significant application of calcium hydroxide is as a flocculant, in water and sewage treatment. It forms a fluffy charged solid that aids in the removal of smaller particles from water, resulting in a clearer product. This application is enabled by the low cost and low toxicity of calcium hydroxide. It is also used in fresh water treatment for raising the pH of the water so that pipes will not corrode where the base water is acidic, because it is self-regulating and does not raise the pH too much.

It is also used in the preparation of ammonia gas (NH3), using the following reaction:

Ca(OH)2 + 2NH4Cl → 2NH3 + CaCl2 + 2H2O

Another large application is in the paper industry, where it is an intermediate in the reaction in the production of sodium hydroxide. This conversion is part of the causticizing step in the Kraft process for making pulp.[8] In the causticizing operation, burned lime is added to green liquor, which is a solution primarily of sodium carbonate and sodium sulfate produced by dissolving smelt, which is the molten form of these chemicals from the recovery furnace.

1. Can be used for producing calcium carbonate raw materials.
2 .Available sulfur powder lime slurry to protect the trunk, prevent frostbite, and prevent insect eggs etc.
3 .Quality product is mainly used for the production of epichlorohydrin, epoxy propane.
4 .Available in petroleum and chemical additives, such as rubber, oil industry and in lubricating oil, can to prevent coking, sludge deposition, and corrosion.
5 .For preparing bleaching powder, bleaching powder, disinfectants, antacids, astringent, water softener, soil acid inhibitor, depilating agent, buffering agent, neutralizing agent, curing agent.
6. Can be used to detect carbon dioxide.


Packed  in PP bags as 25kg/40kg/50kg/500kg/1000kg or depend on customer requirement

Strictly Deliver the goods in accodance with the contract.
Stored in shady, cool and ventilated storehouse; sealed packaging container, preventing damp; separated from deliquescent goods 


Q: Are you a trade company or factory? 
A: We are a salt factory with our own trading company.

Q: What is your main product? 
A: Our main products are salt, refined salt, Calcium oxide ,calcium hydroxide,melting snow salt, various kinds of environment-friendly snowmelt agents, calcium chloride and magnesium chloride, etc. 

Q: How do you control the quality? 
A: Our factory is equipped with professional technicians to control quality, out inspectors take sample for testing every 2 hours to ensure the quality of our production. We also accept BV, SGS or any other Third-party inspection. 

Q: How long time you can make the shipping? 
A: We can make the shipping within 15 days after confirming the order. 

Q: Where is your factory located? How can I visit the factory? 
A: Our factory located in WEIFANG, China. It is only two hours from QINGDAO.